SIP User's Manual
3.2
Using the Home Page
The 'Home' page provides you with a graphical display of the device's front panel,
displaying color-coded status icons for monitoring the functioning of the device. The 'Home'
page also displays general device information (in the 'General Information' pane) such as
the device's IP address and firmware version.
By default, the 'Home' page is displayed when you access the device's Web interface.
To access the Home page:
On the toolbar, click the Home
Note:
In addition to the color-coded status information depicted on the graphical display of the
device (as described in the subsequent table), the Home page displays various read-only
information in the General Information pane:
IP Address: IP address of the device
Subnet Mask: subnet mask address of the device
Default Gateway Address: default gateway used by the device
Analog Port Number: number of analog (FXS and FXO) ports
Firmware Version: software version currently running on the device
Protocol Type: signaling protocol currently used by the device (i.e. SIP)
Gateway Operational State: operational state of the device:
•
LOCKED - device is locked (i.e. no new calls are accepted)
•
UNLOCKED - device is not locked
•
SHUTTING DOWN - device is currently shutting down
To perform these operations, see ''Maintenance Actions'' on page 166.
Version 6.2
Figure 3-26: MP-11x Home Page
Figure 3-27: MP-124 Home Page
The displayed number and type (FXO and/or FXS) of channels depends on
the device's model (e.g., MP-118 or MP-114).
icon; the 'Home' page is displayed.
53
3. Web-Based Management
February 2011