Figure 8-44: Defining Proxy Servers For Gateway Application - AudioCodes MediaPack MP-124 User Manual

g. In the second 'Proxy Address' field, enter the IP address and port of the device (in
the format x.x.x.x:port). This is the same port as defined in the 'SAS Local
UDP/TCP/TLS Port' field (see ''Configuring Common SAS Parameters'' on page
288).
h. From the 'Proxy Redundancy Mode' drop-down list, select 'Homing'.

Figure 8-44: Defining Proxy Servers for Gateway Application

i. Click Submit.
2. Disable the use of user=phone in the SIP URL:
a. Open the 'SIP General Parameters' page (Configuration tab > VoIP menu > SIP
Definitions submenu > General Parameters).
b. From the 'Use user=phone in SIP URL' drop-down list, select 'No'. This instructs
the Gateway application to not use user=phone in SIP URL and therefore,
REGISTER and INVITE messages use SIP URI. (By default, REGISTER
messages are sent with sip uri and INVITE messages with tel uri.)
c. Click Submit.
SIP User's Manual
Figure 8-45: Disabling user=phone in SIP URL
294
MediaPack Series
Document #: LTRT-65415