Table 3-25: Ip-To-Tel Routing Table Description - AudioCodes MediaPack MP-124 User Manual

SIP User's Manual
•
Rule 2: If the incoming IP call destination phone prefix is between 501 and 502,
and source phone prefix is 101, the call is assigned settings configured for IP
Profile ID 1 and routed to Hunt Group ID 2.
•
Rule 3: If the incoming IP call has a From URI host prefix as domain.com, the call
is routed to Hunt Group ID 3.
2. From the 'Routing Index' drop-down list, select the range of entries that you want to
add.
3. Configure the inbound IP routing rule according to the table below.
4. Click the Submit button to save your changes.
5. To save the changes so they are available after a power failure, see ''Saving
Configuration'' on page 169.
Parameter
IP to Tel Routing Mode
[RouteModeIP2Tel]
Dest. Host Prefix
Source Host Prefix
Dest. Phone Prefix
Source Phone Prefix
Version 6.2

Table 3-25: IP-to-Tel Routing Table Description

Determines whether to route the incoming IP call before or after
manipulation of destination number (configured in ''Configuring Number
Manipulation Tables'' on page 129).
[0] Route calls before manipulation = Incoming IP calls are routed
before number manipulation (default).
[1] Route calls after manipulation = Incoming IP calls are routed after
number manipulation are applied.
The Request-URI host name prefix of the incoming SIP INVITE message.
If this routing rule is not required, leave the field empty.
Note: The asterisk (*) wildcard can be used to depict any prefix.
The From URI host name prefix of the incoming SIP INVITE message. If
this routing rule is not required, leave the field empty.
Notes:
The asterisk (*) wildcard can be used to depict any prefix.
If the P-Asserted-Identity header is present in the incoming INVITE
message, then the value of this parameter is compared to the P-
Asserted-Identity URI host name (and not the From header).
The called telephone number prefix.
The prefix can include up to 49 digits.
Note: The prefix can be a single digit or a range of digits. For available
notations, see ''Dialing Plan Notation for Routing and Manipulation'' on
page 228.
The calling telephone number prefix.
The prefix can include up to 49 digits.
Note: The prefix can be a single digit or a range of digits. For available
notations, see ''Dialing Plan Notation for Routing and Manipulation'' on
page 228.
Description
143
3. Web-Based Management
February 2011