AudioCodes MediaPack MP-124 User Manual page 381

SIP User's Manual
Parameter
Web/EMS: Add Empty Authorization
Header
[EmptyAuthorizationHeader]
Web: Add initial Route Header
[InitialRouteHeader]
Version 6.2
Determines whether the SIP Authorization header is included
in initial registration (REGISTER) requests sent by the device.
[0] Disable (default)
[1] Enable
The Authorization header carries the credentials of a user
agent (UA) in a request to a server. The sent REGISTER
message populates the Authorization header with the following
parameters:
username - set to the value of the private user identity
realm - set to the domain name of the home network
uri - set to the SIP URI of the domain name of the home
network
nonce - set to an empty value
response - set to an empty value
For example:
Authorization: Digest
username=alice_private@home1.net,
realm="home1.net", nonce="",
response="e56131d19580cd833064787ecc"
Note: This registration header is according to the IMS 3GPP
TS24.229 and PKT-SP-24.220 specifications.
Determines whether the SIP Route header is included in initial
registration or re-registration (REGISTER) requests sent by the
device.
[0] Disable (default)
[1] Enable
When the device sends a REGISTER message, the Route
header includes either the Proxy's FQDN, or IP address and
port according to the configured Proxy Set, for example:
Route: <sip:10.10.10.10;lr;transport=udp>
or
Route: <sip: pcscf-
gm.ims.rr.com;lr;transport=udp>
381
10. Configuration Parameters Reference
Description
February 2011