Selecting And Altering Parameters - Pfaff 3701 Series Supplement To The Instruction Manual

2

Selecting and altering parameters

.03.03
Switch on the machine.
Press the TE/Speed key to call up the parameter input function.
No
By pressing the corresponding +/- key select the desired parameter group, e.g. "600".
No
By pressing the corresponding +/- key select the desired parameter, e.g. "660" for the
bobbin thread monitoring function.
VAL
By pressing the corresponding +/- key set the desired value for the parameter selected,
e.g. "2" for the "bobbin rest thread counter on" function.
Press the TE/Speed key to take over the value and change to the sewing mode.
TE
No VAL
A 101 OFF
TE
No
A 600
TE
No VAL
A 660 1
TE
No VAL
A 660 2
Controls
9