Adjusting The Reed Switch For The Insert Plate (Only On The Pfaff 3307-3/01) - Pfaff 3307-3 Series Instruction Manual

13 Adjusting the reed switch for the insert plate
.46
(only on the PFAFF 3307-3/01)
Requirement
The reed switch should connect when the insert plate is 5 mm in front of the blind
stitching guide plate (parameter "602", the 11. figure changes from "0" to "1").
Fig. 13 - 44
● Switch on the machine.
● Call up parameter "602".
● First slide back reed switch 1 (screw 2) completely and then adjust it in accordance
with the requirement.
● Switch off the machine.
1
5 mm
111-058
2
602:
1
0110000000 00001
Adjustment
111-059
113