1
Adjusting the potentiometer for speed reduction
.05.12
●
Press "P" on the control panel, while simultaneously switching the machine on.
●
Enter the code
●
Select parameter
●
Set the smallest stroke "
●
Using the stroke adjustment function, call up the small stroke (LED off), see instruction
manual.
●
Take over the value displayed under parameter
●
Select parameter
●
Set the largest stroke "
●
Using the stroke adjustment function, call up the large stroke (LED on).
●
Take over the value displayed under parameter
●
Press "
●
The new values are taken over when sewing is started, and these are maintained
evenafter the machine is switched off.
3112 via the numbered keys and confi rm by pressing "E".
501 via the numbered keys and confi rm by pressing "E".
0".
502 via the numbered keys.
0".
P" twice to quit the input level
The speed is adjusted in accordance with Chapter 3.03 Maximum Speed
in the instruction manual.
Under parameter 117 the speed at max. stroke adjustment can be reduced
again.
Adjustment
(only on the 2235 PREMIUM)
501 by pressing "+".
502 by pressing "+".
17