Colors Are Unstable Or Uneven; Did You Shake The Ink Cartridges Gently Before Installing Them; Is The Media Wrinkled; Is The Printer Installed In A Level And Stable Location - Roland VersaSTUDIO BN-20A User Manual

Colors are unstable or uneven

Did you shake the ink cartridges gently before installing them?

Shake new cartridges gently before you install them. So that the ink mixes well, periodically shake
each ink cartridge 50 times (about 20 seconds) horizontally with a stroke length of around 5 cm (1.97
in.) from each end of the ink cartridge before reinserting it.

Is the media wrinkled?

If the media is wrinkled and comes loose from the platen, colors may be uneven or printing quality
may suffer.
RELATED LINKS
・ P. 86 "Media Feed Problems"

Is the printer installed in a level and stable location?

Never install the machine in a location where it is tilted or where it may wobble or experience vibra-
tion. Also, make sure that the print heads are not exposed to circulating air. These factors may lead to
nozzle clogging or reduced printing quality.
Is the printer being used in a location subject to severe changes in the operat-
ing environment?
Large fluctuations in temperature or humidity while printing is in progress may cause the colors to
change partway through. When you're performing printing, use the machine in a location where tem-
perature and humidity are stable.
82
Output Quality Problems