How to Cut Off Media
Procedure
Media clamp
Front cover
Make sure
The media is cut off at a
location referenced to the
present tool position.
Cut-off Operations
Before you perform cutoff, be sure to detach the media clamps.
Performing cutoff with the media clamps remaining attached may cause the operation to be interrupted due to detec-
tion of the media clamps.
When you're performing cutoff, never use
Unless the end of the media has been pulled out to a location to the front of the platen, cutoff may not be
performed smoothly.
Open the front cover.
Detach the media clamps.
Close the front cover.
lights up.
Hold down
2-2 Loading and Cutting Off Media
for one second or longer.
to pull the media back.
Chapter 2 Operation
35