Table of Contents
Advertisement
Menu 67:
First Circuit = Re-arm,
Exit Abort = Disabled
Entry Abort = Disabled,
Tampers Comms = Disabled, Set
Set No AC (Mains) = Disabled, Reset No AC (Mains) =
Disabled
Alarm Confirmation = Disabled
01-PANEL VERSION
Use this menu show the software version (revision and date) of the end
station.
04-TEST OPTIONS
With this menu you can select one of the following tests: Walk Test , Output
Test (including Sounder Test and Keypad Sounder).
09-PRINT OPTIONS
With an attached printer, this menu allows you to print any of the following:
Print Event Log
Zone Data
The menu also offers the option of printing all these items at once.
11-EDIT NAME
Using Menu 11 you can apply an account name of up to eight characters. To
comply with ABI requirements, the account name is printed at the head of all
system configuration and event log printouts.
21-EDIT ZONE TYP
Use this menu to switch all zone circuit types to either FSL or CC.
31-ZONE NAMES
You can use Menu 31 to give each zone a 8 character name. If a detector
activates an alarm, the system reports the zone name on the display when a
user unsets the system. If you do not want to use a name the system gives
the default names: Zone 01, Zone 02, and so on.
In the log, the system reports events relating to a zone by using the zone
number, for example Z01.
Menu Options
Keypad Data
Output Data
496234
Area
Level Data
System Data
47
- Quick Links:
- Programming Mode
- Programming
Hide quick links:
Advertisement
Table of Contents
