Example 2: Zone Circuit Types - Scantronic 808 Installation And Programming Manual

Example 2: Zone Circuit Types

If you wish to change between 2-wire FSL zones, or 4-wire closed circuit
(CC) zones then you must use Menu 21 to select either FSL or CC zones.
The system cannot use a mix of FSL or CC, all zones must be of the same
circuit type.
1. Select Menu 21.
The display shows:
2. Press Enter.
The display shows:
3. Use the left and right arrow keys to change between CC and FSL.
The displays shows (for example):
4. Press Enter.
The display confirms the change (for example):
496234
4. Programming
21 - EDIT ZONE TYPE
ALL Z_CC
ALL ZFSL
Z1- 8FSL
41