Programming; Programming Mode; Finding Menu Items - Scantronic 808 Installation And Programming Manual

Note: If you are powering up the system for the first time then see "3. Installation -
Initial Power Up".

Programming Mode

To enter Installer Programming Mode:
The display shows the time:
1. Key-in 0 (zero) followed by the Installer code (default 7890), then press
Menu.
The display shows:
2. Press 0.
The display shows:
3. Press Enter.
The display shows
4. Remove the end station lid.
The display shows:
You have now reached the Installer programming mode.

Finding Menu Items

The 808 programming is divided into sets of numbered menus. Each menu
starts with a two digit number. The menus are grouped together into the
following categories:
Menu No
00
01, 04, 09
10, 11
20, 21
31 - 32
40 - 47
50 - 53
60 - 67
For a complete list of Menus and options see the fold out sheet in "5. Pro-
gramming Reference".

4. Programming

Category
Start point for Installer programming.
Software version, Testing, and Printing.
Account Name.
Zone circuit type.
Zone and Area Programming.
Level and keypad Programming.
Output Programming.
System Options.
496234
4. Programming
12:15
MENU NO OR LEVEL
0:INST PROG
REMOVE LID
00:PROG SYSTEM
29