Overview - Scantronic 808 Installation And Programming Manual

The 808 is a programmable Alarm System suitable for domestic or small
commercial premises.
The system comprises an end station in a shielded case, and up to four
separate keypads. The end station provides:
• Connections for up to eight Fully Supervised Loop (FSL) or Closed
Circuit zones (selectable during programming).
• Three outputs, two fully programmable.
• Pins for fitting a plug-on communication device. Any device that
complies with the Scantronic plug-on footprint can be fitted.
The installer can program the system from the keypad, which provides an
eight character Liquid Crystal Display (LCD). The programming interface is
arranged into a set of numbered menus that lead the installer through the
installation process.
The 808 software provides a flexible installation that can meet many differ-
ent needs. The system can provide for up to 8 identified users. The 808
allows users to set the system to four different security Levels (for example
full set and three part sets) which can be programmed by the installer.
Individual zones can be programmed as Flexi-Zones™, which change
behaviour depending on which security Level is set.
Before installing a 808 system make sure you are fully familiar with the
functions of the panel and the installation procedures described in this
manual.

1. Overview

496234 7