AXIOMTEK EP830 Series User Manual page 53

Press <Esc> to return to the Advanced BIOS Features page.
CPU L1 & L2 Cache

These two options speed up memory access. However, it depends
on the CPU/chipset design. The default setting is "Enabled".
CPUs without built-in internal cache will not provide the "CPU
Internal Cache" item on the menu.
Enabled
Disabled
 Hyper-Threading Technology
Use this item to enable or disable Hyper-Threading Technology,
which makes a single physical processor perform multi-tasking
function as two logical ones.
 Quick Power On Self Test
This option speeds up Power on Self Test (POST) after you turn on
the system power. If set as Enabled, BIOS will shorten or skip
some check items during POST. The default setting is "Enabled".
Enabled
Disabled
First/Second/Third Boot Device

These items let you select the 1st, 2nd, and 3rd devices that the
system will search for during its boot-up sequence. The wide range
of selection includes Floppy, LS120, ZIP100, HDD0~3, SCSI, and
CDROM.
 Boot Other Device
This item allows users to enable or disable the boot device not
listed in the First/Second/Third boot devices option above. The
default setting is "Enabled".
 Onboard Lan Boot ROM
Use this item to enable or disable the Boot ROM function of the
onboard LAN chip when the system boots up
 Boot Up NumLock Status
Set the the Num Lock status when the system is powered on.
The default value is "On".
Award BIOS Utility
EP830 All-In-One EPIC Board User's Manual
Enable cache
Disable cache
Enable Quick POST
Normal POST
47