AXIOMTEK EP830 Series User Manual page 66

EP830 All-In-One EPIC Board User's Manual
 Moden Use IRQ
If you want an incoming call on a modem to automatically resume
the system from a powersaving mode, use this item to specify the
interrupt request line (IRQ) used by the modem. You might have to
connect the fax/modem to the board Wake On Modem connector
for working this feature.
 Suspend Mode
After the selected period of system inactivity (1 minute to 1 hour),
all devices except the CPU shut off. The default value is
"Disabled".
Disabled System will never enter SUSPEND mode
Defines the continuous idle time before the system
1/2/4/6/8/10/2
entering SUSPEND mode.
0/30/40
If any item defined in (J) is enabled & active,
Min/1 Hr
SUSPEND timer will be reloaded
 HDD Power Down
If HDD activity is not detected for the length of time specified in this
field, the hard disk drive will be powered down while all other
devices remain active.
 Suspend Mode
After a selected period of system inactivity (1 minute to 1 hour), all
devices except the CPU shut off. The default value is "Disabled".
Disabled The System will never enter the SUSPEND mode.
It defines continuous idle time before the system
1/2/4/6/8/10/2
entering the SUSPEND mode.
0/30/40
If any item defined in (J) is enabled and active, the
Min/1 Hr
SUSPEND timer will be reloaded.
 HDD Power Down
If HDD activity is not detected for a specified length of time in this
field, the hard disk drive will be powered down while other devices
remain active.
60
Award BIOS Utility