Add Item; Delete Item; Device Setting; Configuration Setting - D-Link DES-1526 Manual

Note: In order to receive Trap information, the Switch has to be
configured with Trap IP and Trap Events in the Web browser.
These settings are available in the Trap Setting Menu.

Add Item

To add a device to the Monitor List manually, enter the IP
Address of the device that you want to monitor.

Delete Item

To delete the device in the Monitor List.

Device Setting

You can set the device by using the function key in the Device
Setting Dialog box.

Configuration Setting

In this Configuration Setting, you can set the IP Address, Subnet
Mask, Gateway, Set Trap to (Trap IP Address), System name,
Location, and DHCP setting.
In factory default, the IP address of the DES-1526 will be
atomically assigned from a DHCP server (DHCP enabled). If
your network has no DHCP server, the DES-1526 will fail to get
an IP address, and the DES-1526 will be assigned the default IP
address of 192.168.0.1 with a netmask of 255.255.255.0.
Select the device in the Discovery list or Monitor List and press
this button; then the Configuration Setting window will pop up
(Figure 11). After filling in the data that you want to change, you
27