Table of Contents
Advertisement
Setup GUI – AUDIO PROCESSOR - Setup
Setup GUI – AUDIO PROCESSOR – Input – Voice
You may set the input conditions for both signal channels - voice (V1 / V2) and program (2L / 2R) here :
Link
Voice Processing Signal Chain Order
Processing Bypass
Latency Compensation [On / Off]
Bit Transparency
[Unlinked, Linked]
For stereo operation you may link the setup parameters
28
The order of the processing blocks
can be re-arranged:
De-Esser, Filter, Dynamic
Individually to match your
preference.
[On / Off]
You may turn the bypass on/off from
here by activating the check box.
The bypass functionality may be
configured at the EVENTS >Actions
pane where the link will direct you to.
You may compensate for processing
latency introduced by respective
processing blocks. I.e. the program
path will be delayed if spectral
signature is turned on for the voice
channel.
[OFF / AUTO / ON]
You may force the DSP to pass
through the audio stream untouched
in case there is encoded audio
present. The AUTO mode is
triggered by the AES channel status.
– Input – Program
V*AP
Advertisement
Table of Contents
