Operating; Operating - Menu Structure Of The Front Panel - junger D-AP LM4 Manual

Operating

Operating – menu structure of the Front Panel :
The display after power up – the idle display – shows the input "IN" and output "OUT" short term (3secs.)
loudness of the programs processed by the respective device channels. E.g.:
If you turn the RE the display will change to the True Peak Hold display of the respective channels:
And vice versa. If you press
Pressing <ESC> will reset the display reading (HOLD reset).
The 4 direct function buttons of the front panel will move you to the respective function blocks
where the RE selects the respective items.
<MODE>
<INPUT>
<LEVELER>
<LIMITER>
The overall parameter menu structure is shown on the next page.
SHORT-TERM
IN -70.0
TRUEPEAK-HOLD
IN -70.0
<SEL> you will see the values of the other processing channels.
LOUDNESS MODE > SYNC SOURCE
< MUTE < ENABLE < LINK
INPUT GAIN > MONO > HP FILTER > LP FILTER > DELAY >
INPUT ROUTING BIT TRANSPARENT
< LINK
ENABLE > LOUDNESS TARGET > TIME > MAX GAIN >
FREEZ LEVEL > TP MAX GAIN > TP RESPONSE > PROCESSING >
CLEAR HISTORY > INITIAL GAIN > THRESHOLD
ENABLE > MAX TRUE PEAK > PROCESSING
3s CH 1/2
OUT -70.0
CH 1/2
OUT -70.0
6
D*AP LM 4