Input Select - Eiki LC-XBS500 Owner's Manual

Basic operation

Input select

Direct Operation
Press VGA IN 1, VGA IN 2, HDMI, Component,
Video, S-video, Network, Memory Viewer or
USB Display on the remote control as input
source.
Menu operation
1 Press INPUT button on the top control to
display the input select menu.
2 Press  button to select Computer 1,
Computer 2, HDMI, Component, Video, S-video,
Network, Memory Viewer or USB Display,
then press the OK button.
When input source is from
Computer 1
computer connected to VGA
IN 1 terminal with VGA cable,
please select "Computer 1".
When input source is from
Computer 2
computer connected to VGA IN
2/VGA OUT terminal with VGA
cable, please select "Computer
2".
When input source is from
HDMI
equipment connected to HDMI
terminal with HDMI cable,
please select "HDMI".
Select it when the input source
Component
is from the video equipment
connected to YCbCr terminal.
Select it when the video input
Video
signal is connected to VIDEO
IN terminal.
Select it when the video input
S-video
signal is connected to S-VIDEO
IN terminal.
Note:
- When the "Input search" function is set to "On" in the "Auto setup" function, press AUTO button,
the input signal will be searched automatically.
- When VGA IN 2/VGA OUT terminal is used as VGA OUT, Computer 2 can not be selected.
32
Remote control
HDMI
VGA IN 1
VGA IN 2
Top control
Input select menu
Computer 1
Computer 2

HDMI
Component
Video
S-video
Network
Memory Viewer
USB Display
VIDEO
S-VIDEO
COMPONENT
INPUT button