Power Management - Eiki LC-XBS500 Owner's Manual

Power management

Power management
Display
Ready
Shut down
Color adjust
Off

Setting Timer
Ready countdown
Expand
Memory
Viewer
Info.
Move
For reducing power consumption as well as maintaining the lamp life, the Power management
function turns off the projection lamp when the projector is not operated for a certain period. Select
one of the following options:
Ready .................. When the lamp has been fully cooled down, the POWER indicator changes to
green blinking. In this condition, the projection lamp will be turned on if the input
signal is reconnected or any button on the remote control or top control is
pressed.
Shut down ........... When the lamp has been fully cooled down, the power will be turned off.
Off ....................... Power management function is off.
Timer ................... If the input signal is interrupted and no button is pressed for more than 30
seconds, the timer display with No signal appears. It starts the countdown until
the lamp is turned off. Press  button to set the Timer(1~30min.)
Ready countdown..Set the time that ready status transfers to standby status automatically.(0-
30min. 0 Min: not transfer automatically)
In ready status, press POWER button to switch to standby status, and press
any other button to turn on the projector.
Power management
5 Min
0 Min
Select Back
OK
Esc
Power management
No signal
01 : 20
Time left before Lamp is off.
Note:
Factory default: "Timer: 5 min",
"Ready countdown: 0 min".
Expand
51