Input Select - Eiki EK-120 Series Owner's Manual

Input select

Direct Operation
Press VGA, ViIDEO or HDMI on the remote
control as input source.
Menu operation
1 Press INPUT button on the top control or
remote controll to display the input select
menu.
2 Press  button to select VGA, HDMI, HDMI
2, Video, Network, Memory Viewer or USB
Display, then press the OK button.
When input source is from
VGA
computer connected to VGA IN
terminal with VGA cable, please
select "VGA".
When input source is from
HDMI 1
equipment connected to HDMI
terminal with HDMI cable, please
select "HDMI".
When input source is from
HDMI 2
equipment connected to HDMI 2
terminal with HDMI cable, please
select "HDMI 2".
Select it when the video input
Video
signal is connected to VIDEO IN
terminal.
When input source is from
Network
network connected to LAN
terminal with LAN cable, please
select "Network".
When input source is from device
Memory Viewer
connected to USB-A terminal,
please select "Memory Viewer".
When input source is from device
USB Display
connected to USB-B terminal,
please select "USB Display".
Note:
- When the "Input search" function is set to "On" in the "Auto setup" function, press AUTO button,
the input signal will be searched automatically.
- When signal is in "USB Display","Memory Viewer" and "Network", FREEZE, ASPECT, IMAGE,
AUTO SETUP and SCREEN function cannot work.
- Memory Viewer function, please refer to page 60-61.
- USB Display function, please refer to page 62
Basic operation
Remote control
INPUT
VGA
Top control
Input select menu
INPUT
VGA VIDEO HDMI
AUTO MENU
KEYSTONE IMAGE FREEZE PATTERN
SCREEN LAMP MUTE INFO.
BLANK
+ +
D.ZOOM VOLUME TIMER
- -
INPUT button
VGA
HDMI 1
HDMI 2
Video
Network
Memory Viewer
USB Display
VIDEO
HDMI
27