Input Selection; Input Select - Eiki EK-850LU Owner's Manual

Input select

Direct Operation
Press HDMI 1, VGA, USB-B, HDMI 2, DVI,
HDBASET, NETWORK or USB-A on the
remote control as input source.
Menu operation
1 Press INPUT button on the remote control or
control panel to display the input select menu.
2 Press  button to select VGA, HDMI
1, HDMI 2, HDBaseT, SDI, DVI, Memory
Viewer, Network or USB Display, then press
the OK button.
When input source is from computer
VGA
connected to VGA terminal with VGA
cable, please select "VGA".
When input source is from equip-
HDMI 1
ment connected to HDMI terminal
with HDMI cable, please select
"HDMI 1".
When input source is from equip-
HDMI 2
ment connected to HDMI terminal
with HDMI cable, please select
"HDMI 2".
When input source is from equip-
HDBase T
ment connected to HDBaseT termi-
nal with RJ45 cable, please select
"HDBaseT".
*This function is not available for EK-512X
Select it when the input source is
SDI
from the video equipment connected
to SDI terminal.
Select it when the video input signal
DVI
is connected to DVI IN terminal.
When input source is from device
Memory Viewer
connected to USB-A terminal, please
select "Memory Viewer".
When input source is from network
Network
connected to LAN terminal with LAN
cable, please select "Network".
When input source is from the
USB Display
device connected to USB terminal,
please select "USB Display".

Input selection

Remote control
HDMI 2
HDMI 1
Control Panel
Input select menu
Note:
- When the "Input search" function is set to "On"
in the "Auto setup" function, the input signal will
be searched automatically.
- When input signal is from "USB Display",
"Memory Viewer" and "Network", the FREEZE,
ASPECT, IMAGE, AUTO SETUP, TEST
PATTERN and SCREEN function cannot work.
DVI
HDMI2
DVI
VGA
INPUT
USB-B
LENS SHIFT
FREEZE
KEYSTONE
INFO.
VGA
HDMI 1
HDMI 2
HDBase T
SDI
DVI
Memory Viewer
Network
USB Display
HDBASET
NETWORK
USB-A
INPUT
INPUT
45