Eiki LC-XBS500 Owner's Manual page 33

Input select
Direct Operation
Press VGA IN 1, VGA IN 2, HDMI, Component,
Video, S-video, Network, Memory Viewer or
USB Display on the remote control as input
source.
Menu operation
1 Press INPUT button on the top control to
display the input select menu.
2 Press  button to select Computer 1
Computer 2, HDMI, Component, Video,
S-video, Network, Memory Viewer or USB
Display, then press the OK button.
When input source is from
Network
network connected to LAN
terminal with LAN cable, please
select "Network".
When input source is from
Memory Viewer
device connected to USB-A
terminal, please select "Memory
Viewer".
When input source is from
USB Display
device connected to USB-B
terminal, please select "USB
Display".
Note:
- When the "Input search" function is set to "On" in the "Auto setup" function, press AUTO button,
the input signal will be searched automatically.
- When signal is in "USB Display","Memory Viewer" and "Network", FREEZE, ASPECT, IMAGE,
AUTO SETUP and SCREEN function cannot work.
- Memory Viewer function, please refer to page 67~68.
- USB Display function, please refer to page 69~70.
Remote control
Top control
Input select menu
Computer 1
Computer 2

HDMI
Component
Video
S-video
Network
Memory Viewer
USB Display
Basic operation
NETWORK
USB DISPLAY
MEMORY VIEWER
INPUT button
33