Keystone - Eiki LC-XBS500 Owner's Manual

Basic operation

Keystone

If a projected image has keystone distortion,
follow the steps below to manually correct the
keystone distortion.
Press KEYSTONE button on the top control or
on the remote control. The Keystone screen
will displayed, (it includes: H/V Keystone,
Corner correction, Curved correction and Reset
value), press to select the item.
H/V Keystone.........Adjusts when the horizontal
or vertical trapezoid of the
projected image is distorted.
Corner correction...Adjusts when the four
corners of the projected
image are distorted.
Curved correction...Adjusts when the linearity
is not uniform or the vertical
and horizontal lines are
Reset value............Return the corrected values
to the factory default values.
H/V Keystone
● The arrows are white when there is no correction.
● The arrows that are used for correction turns red.
● Press  button long time, the arrows
turn red and can be adjusted quickly
● The arrows disappear at the maximum correction.
● If you press the KEYSTONE button on the
remote control or top control once again while
the keystone dialog box is being displayed,
the keystone adjustment is canceled.
● The adjustable range can be limited depending
on the input signal.
28
distorted.


Top control
Remote control
H/V Keystone
Corner correction
Curved correction
Reset value
KEYSTONE
button

button
KEYSTONE
button