Display; Auto Pc Adj; Fine Sync H Position; Position - Eiki LC-XBS500 Owner's Manual

Display

Auto PC adj.

Auto PC Adjustment function is provided to automatically adjust Fine sync, Horizontal, Vertical and H.Size
to conform to your computer.
Menu operation
Auto PC adj.
1. Press MENU button on the remote control
or top control to display screen menu.
Press  button to select "Display", then
press the OK button.
2. Press  button to select "Auto PC adj.",
then press the OK button. "Please wait" will
be displayed on the screen, the Auto PC adj.
function will be executed.
Fine sync
You can cut off flicker from the image displayed
by pressing  to adjust the value.(from 0 to
31).
H Position
Press  to adjust the horizontal image

position.

V Position
Press  to adjust the vertical image position.

H.Size

This function is used to adjust and minimize
the effect of interference caused by projection
of patterns consisting of vertical stripes.
The projection of the vertical striped pattern
may cause cyclic patterns (noise). Adjust to
minimize the amount of interference.(From -15
to +15).
H.Size must be set before adjust Fine sync.
√ Note:
The adjustment of Fine sync, H Position, V
Position and H.Size is only for computer
signal input.
34
Auto PC adj. Menu
Auto PC adj.
Display
Fine sync
H Position
Color adjust
V Position
H.Size
Setting
Aspect
Expand
Project way
Menu position
Memory
Viewer
Background display
System
Info.
Move
Note:
- The projector executes the Auto PC adj.
automatically when the computer signals input
the projector for the first time.
- Automatic adjustment may not work depending
on the model of the computer and the input
signal.
- The Auto PC adj. cannot be operated when
480i, 576i, 480p, 576p, 720p 1080i or 1080p is
selected in the "Display" menu → "System",
or when the signal is coming from the HDMI
terminal.
0
0
0
0
Normal
Front
Upper right
Blue
- - - -
Exit
Select
OK