Logo - Eiki LC-XBS500 Owner's Manual

Logo

This function allows you to customize the screen logo with Logo select, Capture, Logo PIN code
lock and Logo PIN code change functions.
Logo Select
This function decides on the starting-up display
from following options.
Default .... Show the factory-set logo.
User..........Show the image captured by user.
Off ........... Show the countdown display only.
Capture
You can capture a projected image as start logo .
Select "Capture" and press the OK button.
Confirmation dialog box appears, select "Yes"
to start capturing.
Logo PIN code Lock
This function prevents an unauthorized person from changing the screen logo.
Off ............The screen logo can be changed freely from the Logo menu.
On ............The screen logo cannot be changed without a Logo PIN code.
If you want to change the Logo PIN code lock setting, press the OK button and the Logo PIN code dialog
box appears. Enter a Logo PIN code by following the steps below.
PIN code reset
Press  button to select a number, and then press the OK button to enter this number,
automatically move the cursor to next box. If you fixed an incorrect number, press MENU button to
reset it again.
Repeat this step to complete entering a three-digit number.
After entering the three-digit number, automatically move the cursor to "Set", and press the OK
button, then you can start to operate the projector.
If you entered an incorrect PIN code, the number (***) turn red, it will be reset automatically within
one second. Enter the correct PIN code all over again.
Logo PIN code change
You can change the Logo PIN code (three number). Press the OK button to select Logo PIN code
change. Logo Pin code dialog box appears, press ▲▼ button to enter the correct code. The New Logo
PIN code input dialog box appears. Set a new Logo PIN code, confirmation box appears, select Yes to
set the new Logo Pin code.
Be sure to note the new Logo PIN code and keep it on hand. If you lost the number, you could no longer
change the Logo PIN code setting.
CAUTION:
WHEN YOU HAVE CHANGED THE LOGO PIN CODE, WRITE DOWN THE NEW PIN CODE
IN COLUMN OF THE LOGO PIN CODE NO. MEMO ON PAGE 88, AND KEEP IT SECURELY.
SHOULD THE LOGO PIN CODE BE LOST OR FORGOTTEN, THE LOGO PIN CODE SETTING
CAN NO LONGER BE CHANGED.
Logo
Display
Logo select
Capture
Color adjust
Logo PIN code lock
Setting Logo PIN code change
Expand
Memory
Viewer
Info.
Adjust
Expand
Logo
Default
Off
Select Back
OK Esc
49