Basic Operation Turning On the Projector Complete peripheral connections (with a computer, VCR, etc.) before turning on the projector. Connect the projector's AC power cord into an AC outlet. The POWER indicator becomes red. Press the POWER ON/STAND-BY button on the top control or on the remote control.
Basic Operation Turning Off the Projector Press the POWER ON/STAND-BY button on the top control or on the remote control, and a message "Power off?" appears on the screen. Press the POWER ON/STAND-BY button again to turn off the projector.The POWER indicator starts to blink red, and it continues while the cooling fans are operating for about 90 seconds.
Part Names and Functions Remote Control POWER ON/STAND-By button Turn the projector on or off. (p.18, 19) VIDEO button Select VIDEO input source. (p.3, 35) COMPUTER button Select COMPUTER input source. (p.3, 5, 36) MENU button Open or close the On-Screen Menu. (p0) Point (VOLUME + / –) buttons ed 7 8...
Basic Operation Sound Adjustment Direct Operation Top Control Volume VOLUME+/- Press the VOLUME+/– buttons on the top control or on buttons the remote control to adjust the volume. The volume dialog box appears on the screen for a few seconds. Mute Remote Control Press the MUTE button on the remote control to cut off...
Page 6
Basic Operation AUTO PC button Remote Control Press the AUTO PC button on the remote control to VOLUME +/- buttons operate the Auto PC function. For more detail, see (See p.3.) page 7. KEySTONE button (See p.) D .ZOOM buttons POINT buttons Press the D.ZOOM buttons on the remote control to...
Computer Input Input Source Selection Direct Operation Top Control INPUT button Choose either Computer 1 or Computer by pressing INPUT button the INPUT button on the top control or press the COMPUTER button on the remote control. Before Computer 1 using these buttons, correct input source should be selected through Menu operation as described below.