Input Select - Eiki EK-351WST Owner's Manual

Input select

Direct operation
Press VGA , VIDEO, HDMI on the remote control
as input source.
Menu operation
1 Press INPUT button on the remote control or
control panel to display the input select menu.
2 Press  button to select VGA 1, VGA 2,
HDMI 1, HDMI 2(MHL), Component, Video,
S-video, Memory Viewer, Network or USB
Display, then press the OK button.
When input source is from computer
VGA 1
connected to VGA IN 1 terminal with
VGA cable, please select "VGA 1".
When input source is from comput-
VGA 2
er connected to VGA IN 2(YPbPr/
S-VIDEO) terminal with VGA cable,
please select VGA 2.
When input source is from equip-
HDMI 1
ment connected to HDMI 1 terminal
with HDMI cable, please select
"HDMI 1".
When input source is from equip-
HDMI 2(MHL)
ment connected to HDMI 2(MHL)
terminal with HDMI cable, please
select "HDMI 2".
Select it when the input source is
Component
from the video equipment connected
to VGA IN 2(YPbPr/S-VIDEO)
terminal via Component to VGA
cable.
Select it when the video input signal
Video
is connected to VIDEO IN terminal.
Note:

- When the "Input search" function is set to "On" in the "Auto setup" function, the input signal will
be searched automatically.
Input selection
Remote control
Control Panel
Input select menu
INPUT
INPUT
VGA VIDEO HDMI
VGA 1
AUTO MENU
KEYSTONE IMAGE FREEZE
SCREEN LAMP MUTE
BLANK
+ +
D.ZOOM VOLUME TIMER
- -
VGA 1
VGA 2
HDMI 1
HDMI 2(MHL)
Component
Video
S-video
Memory Viewer
Network
USB Display
HDMI
VIDEO
PATTERN
INFO.
INPUT
31