Basic Operation; Turn On The Projector - Eiki LC-XBS500 Owner's Manual

Turn on the projector

1. Complete peripheral connections (with a
computer, VCR,etc.) before turning on the
projector.
2. Connect the projector's AC power cord into
the AC outlet. The POWER indicator turns
red.
3. Press the POWER button on the top control
or on the remote control. The POWER
indicator becomes green and the cooling
fans start to work. The preparation display
appears on the screen.
4. If the projector is locked with a PIN code, a
PIN code input dialog box appears. Enter
the PIN code as instructed below.
 Note:
● When the logo select is set to be "Off", the
logo will not be displayed on the screen.(See
page 49)
Enter a PIN code
Press the OK button, press  button to
select a number, then press the OK button,
select a number and enter it to the PIN code
box, then number changes to "*", automatically
move the cursor to next box. If you fixed an
incorrect number, press MENU button to reset
it again.
Repeat this step to complete entering a three-
digit number.
After entering the three-digit number, move the
cursor to "Set", then you can start to operate
the projector.
If you entered an incorrect "PIN code", the
number (***) turn red. PIN code will be reset
within one second automatically, Enter the
correct PIN code all over again.
What is PIN code?
PIN (Personal Identification Number) code is a
security code that allows the person who knows
it to operate the projector. Setting the PIN code
can prevent unauthorized use of the projector.
A PIN code consists of a three-digit number.
Refer to the PIN code lock function in the
"Expand" "Security" menu on page 50 for PIN
code lock operation of the projector.
-----
OK
*
Move
OK
Move the cursor to "Set", and press "OK".
Caution on handling the PIN code
If you forget your PIN code, the
projector can no longer be started.
Take a special care in setting a
new PIN code. Write down the
number in a column on page 88 of
this manual and keep it properly.
Should the PIN code be missing
or forgotten, consult your dealer or
service center.

Basic operation

16
PIN Code
Set
Cancel
Input PIN code Back
Esc
PIN Code
Set
Cancel
Select Back
Esc
23