Eiki LC-XBS500 Owner's Manual page 70

Using useful functions
■ When using Mac OS
Mac OS operating environment
OS
CPU
Amount of memory
Hard-disk free space 20 MB or more
Display
● There is no guarantee for all computers that meet the above conditions will operate properly.
Projecting the USB Display
1. Connect the USB-B terminal of the projector to a computer with a USB converting cable.
2. Press the USB DISPLAY button on the remote control or switch the input source to USB
Display.
● Press the INPUT button on the top control and select the input source in the Input menu.
● The image on the computer screen is projected.
3. Double-click "Monitor.app" in the virtual disk that has been mounted.
4. Right-click the driver icon
● Pop-up menu is only displayed in English.
● The item which is displayed in gray is unavailable.
Active audio/
Disable audio
Play video/
Pause video
Start/Stop
Quit
Note:
- It will take a while when you want to project the computer screen.
- Connect a USB cable directly to the USB connector of a computer. It will not work when
connecting through a USB hub.
Termination of the USB display
When terminate the USB display, remove the USB cable directly.
70
Mac OS X 10.5, 10.6, 10.7
Power PC G4 1GHz or faster
512 MB or more
Resolution 640 x 480 or more, 1 600 x 1 200 or less
in the dock of computer and select one item in Pop-up menu.
Set whether to output the audio from the computer.
Switch between playing and pausing the image.
Set whether to display the image from the computer.
Terminate the USB Display.