Moving The Projector - Eiki LC-XBS500 Owner's Manual

Moving the projector

When moving the projector, take care of the
lens and retract the adjustable feet to prevent
damage to the lens and cabinet.
Notes on Lens Protective Ring
Before operating the projector, remove the lens
protective ring. In case of transportation, rotate
the FOCUS ring and LENS SHIFT lever to let
the lens back to its central position and put on
the lens protective ring to protect the lens.
ZOOM
Caution in moving or transporting the
projector
– Do not drop or bump the projector, otherwise
damages or malfunctions may result.
– When carrying the projector, use a suitable
carrying case.
– Do not transport the projector by courier or
any other transport service in an unsuitable
transport case. This may cause damage
to the projector. For more information about
transporting the projector by courier or any
other transport service, consult your dealer.
– Do not put the projector in a case before it is
cooled enough.
FOCUS
LENS SHIFT
Notes on Projector Handling
When lifting or moving the projector, do not
hold the lens and the peripheral part to prevent
damage on the lens or projector.
Be careful in handling the projector. Do not
drop or bump it to avoid strong force, or place
other objects on the cabinet.
Note:
The lens of the projector is manual.
When operating the projector, pay
attention to the following conditions.
● When the lens is rotating, do not
touch it, otherwise your fingers may
get hurt.
● Do not allow a child to touch the lens.
Do not hold the lens and the peripheral part.
Safety Guide
7