Input Select - Eiki EK-308U Owner's Manual

Input select

Direct Operation
Press VGA, HDMI or Video on the remote control
as input source.
Menu operation
1 Press INPUT button on the top control to
display the input select menu.
2 Press  button to select VGA 1, VGA 2,
HDMI, Component, Video, S-video, Network,
Memory Viewer or USB Display, then press
the OK button.
When input source is from
VGA 1
computer connected to VGA IN 1
terminal with VGA cable, please
select "VGA 1".
When input source is from
VGA 2
computer connected to VGA IN 2 /
VGA OUT terminal with VGA cable,
please select "VGA 2".
When input source is from
HDMI
equipment connected to HDMI
terminal with HDMI cable, please
select "HDMI".
Select it when the input source
Component
is from the video equipment
connected to YPbPr terminal.
Select it when the video input
Video
signal is connected to VIDEO IN
terminal.
Note:
- When the "Input search" function is set to "On" in the "Auto setup" function, press AUTO button,
the input signal will be searched automatically.
- When VGA IN 2/VGA OUT terminal is used as VGA OUT, Computer 2 can not be selected.
30
Basic operation
Remote control
INPUT
VGA
Top control
Input select menu
INPUT
VGA VIDEO HDMI
AUTO MENU
KEYSTONE IMAGE FREEZE PATTERN
SCREEN LAMP MUTE INFO.
BLANK
+ +
D.ZOOM VOLUME
TIMER
- -
INPUT button
VGA 1
VGA 2
HDMI
HDMI 2(MHL)
Component
Video
S-video
Network
Memory Viewer
USB Display
VIDEO
HDMI