Memory Viewer; Set Slide; Slide Transition Effect; Sort Order - Eiki LC-XBS500 Owner's Manual

Memory viewer

The Memory Viewer function makes it possible to project the pictures which are stored in the USB
memory when the USB memory is inserted into the projector
1 Press MEMORY VEIWER button on the remote control.
2 Press MENU button on the remote control to display screen menu. Press  button to select
"Memory Viewer", then press the OK button.
3 Press  button to select the item you want to set, press the OK button.
4 Press  button to adjust the item, then press the OK button.

Set Slide

Start the slide show.

Slide transition effect

Set the slide transition effect when the slide
show image is switching.
Slide down ... Switch the image from the top to
the bottom.
Slide right .... .Switch the image from the left to
the right.

Sort Order

Set the sort order of the slide show.
Extend Order ...... Sort files or folders in
extended order.
Size Order .......... Sort files or folders in
amount of data order.
Time Order ......... Sort files or folders in stored
time order.
Name Order ....... Sort files or folders in name
order.
 Note:
See page 67 for Memory viewer function.
56
Memory Viewer menu
Set Slide
Display
Slide transition effect
Sort order
Color adjust
Rotate
Setting Best fit
Repeat
Expand
Apply
Memory
Viewer
Info.
Move
 Note:
● The "Memory Viewer" menu is available
when input the "Memory Viewer" signal.
● The menu except for "Set Slide" which setting
have been changed is not yet effective
before the "Apply" is not executed.
Slide right
Extend order
No rotate
Off
Off
Select Back
OK Esc