Remote Control - Eiki LC-XBS500 Owner's Manual

Remote control

②
③
⑥
⑨
⑫
⑭
* Laser Transmitting Window:
Laser beam will emit from this window. While
pressing LASER button during the projection
to use the remote control as a laser pointer.
Do not stare directly at the laser transmitting
window or aim the window at human body to
avoid any physical injury.
① POWER
Turn on or turn off the projector.
② LASER
Press this button during projection, the
remote control can be used as a laser
pointer.
③ HDMI
Select "HDMI" as input source.
①
*
④
⑤
⑦
⑧
⑩
⑪
⑬
⑮
Part names and functions
④ VIDEO
Select "Video" as input source.
⑤ NETWORK
Select "Network" as input source.
⑥ VGA IN 1
Select "Computer 1" as input source.
⑦ S-VIDEO
Select "S-video" as input source.
⑧ USB DISPLAY
Select "USB Display" as input source.
⑨ VGA IN 2
Select "Computer 2" as input source.
Note:
- It only can switch input source to "Computer 2"
when select VGA IN2/VGA OUT as VGA IN2.
⑩ COMPONENT
Select "Component" as input source.
⑪ MEMORY VIEWER
Select "Memory Viewer" as input
source.
⑫ MENU
Open or close the screen menu.
⑬ AUTO
Enter auto setup adjust mode.
⑭  button
- Select item or adjust data in screen
menu.
- Select the image display area in
digital zoom + mode.
⑮ OK
Enter the menu or select an item in
the menu.
13