Background Display; System - Eiki LC-XBS500 Owner's Manual

Display

Background Display

This function is used to select the screen
background of the projector when there is no
signal detected.
1 Press MENU button on the remote control
or top control to display screen menu. Press
 button to select "Display", then press
the OK button.
2 Press  button to select "Background
display", press the OK button.
3 Press  button to select the item you want
to set, press the OK button.
Black .... Select black background.
Blue ...... Select blue background.

System

Computer system select
The projector automatically tunes to various types of computers with its function of Multi-scan
system and Auto PC Adjustment. If a computer is selected as a signal source, the projector
automatically detects the signal format and tunes to project proper images without any additional
setting.
One of the following messages may appear
when:
When the projector cannot recognize
Auto
the connected signal conforming to
the provided computer system, Auto
is displayed on the System menu
box and the Auto PC Adj. function
works to display proper images. If
the image is not projected properly,
a manual adjustment is required.
There is no signal input from computer.
-----
Check the connection between your
computer and projector.
36
Background display
Auto PC adj.
Display
Fine sync
H Position
Color adjust
V Position
H.Size
Setting
Aspect
Expand
Project way
Menu position
Memory
Viewer
Background display
System
Info.
Adjust
System menu
Auto PC adj.
Display
Fine sync
H Position
Color adjust
V Position
H.Size
Setting
Aspect
Expand
Project way
Menu position
Memory
Viewer
Background display
System
Info.
Adjust
System
0
0
0
0
Normal
Front
Upper right
Blue
- - - -
Back
Select
OK Esc
25
Normal
Front
Upper right
Blue
1280x1024, 60Hz
Select Back
OK Esc
0
0
0