Installing The Cs 120P In A Hard Ceiling - Extron electronics CS 26T Plus User Manual

Installing the CS 120P in a Hard Ceiling

If you are installing the CS 1226T Plus in a hard ceiling (having no ceiling tiles), with the
ceiling structure in place, install the CS 120P:
•
•
•
•
NOTE: Installation in this type of ceiling must be done while access to the ceiling is
It is the responsibility of the installer to identify a suitable mounting location and provide
the mounting hardware.
The CS 120P must be mounted as close as possible to the upper surface of the ceiling
material.
The lip of the CS 120P should protrude into the hole cut for the speaker.
Do not leave a gap between the CS 120P and the ceiling material.
still possible.
CS 26T Plus and CS 120P User Guide • Installation 32