Protected Setup Navigation Buttons - AMX NXD-1200VG Operation/Reference Manual

Firmware Pages and Descriptions

Protected Setup Navigation Buttons

The Protected Setup Navigation Buttons (FIG. 114) appear on the left of the panel screen when the Protected Setup page
is currently active.
Modero Protected
Setup Navigation
FIG. 114 Protected Setup Navigation Buttons
These Navigation Buttons are specific to these Modero panels and include the panel specific elements described in the
following table:
Protected Setup Navigation Button Elements
System Settings:
Sensors:
Calibrate:
G4 Web Control:
Other Settings:
Tools:
Wireless Settings: Press the Wireless Settings button to access the Wireless Settings page where you can setup the
132
Buttons
Press the System Settings button to access the System Settings page, where you can alter the
communication parameters of both the NetLinx Master and Modero panel.
• Refer to the System Settings Page section on page 136 for more detailed information.
Press the Sensors button to access the Sensor Settings page, where you can modify/monitor both
the light and motion sensor settings.
• Refer to the Sensor Settings Page section on page 137 for more detailed information.
Press the Calibrate button to access the Calibration page, where you can use the displayed set of
crosshairs to calibrate a touch panel.
• Refer to the Calibration Page section on page 140 for more detailed information.
Press the G4 Web Control button to access the G4 Web Control Settings page, where you can
enable or disable display and control of your panel (via the web) by a PC running a VNC client. Refer
to the G4 Web Control Settings section on page 140 for more information on this page.
• Refer to the Using G4 Web Control to Interact with a G4 Panel section on page 98 for more
detailed information on how to use this feature.
Press the Other Settings button to access the slideout menu for the Cache and Passwords
buttons:
• Press the Cache button to access the Cache Settings page, where you may change the image
cache settings or view the image cache status. Refer to the Cache Settings Page section on
page 142 for more detailed information.
• Press the Passwords button to access the Password Settings page, where you can specify up
to five security passwords. Default password is 1988. Refer to the Password Settings
Page section on page 144 for more detailed information.
Press the Tools button to access the slideout menu for the Panel Logs, Panel Statistics, and
Connection Utility buttons:
• Press the Panel Logs button to open the Panel Connection Logs page (page 145)
• Press the Panel Statistics button to open the Panel Statistics page (page 146),
• Press the Connection Utility button to open the Connection Utility popup window (page 147).
wireless connection parameters used by the optional
NXA-PCI80211G wireless card. Refer to the Wireless Settings Page section on page 148 for more
detailed information.
VG Series Modero Touch Panels