Setup Page - AMX NXD-1200VG Operation/Reference Manual

Firmware Pages and Descriptions
Setup Navigation Button Elements (Cont.)
Battery Base:

Setup Page

This page (FIG. 101) centers around basic Modero panel properties such as: Connection Status of the panel, Display
Timeout, Inactivity Page Flip Time, Inactivity page file, and the Panel Brightness.
FIG. 101 Setup page
The elements of the Setup page are described in the table below:
Setup Page Elements
Exit:
Connection Status icon: This visual display of the connection status allows the user to have a current update of the
Connection Status:
116
Press the Battery Base button to access the Battery Base page, where you can modify and monitor
NXT-BP Modero Power Pack parameters.
• This button only appears when a Modero Table Top panel (NXT) is connected to an NXA-BASE/B
battery base.
• Refer to the Battery Base Page section on page 130 for more detailed information.
Returns you to the Main touch panel page. In this case, the previous page is the default Main
page.
panel's connection status regardless of what page is currently active.
• A Lock only appears on the icon if the panel has established a connection with a currently
secured target Master (requiring a username and password).
Displays whether the panel is communicating externally, the encryption status of the
communicating Master, what connection type is being used (Ethernet or USB), and what
System the panel is a part of.
This visual display of the connection status is also reflected at the upper-right of each firmware
page. This allows the user to have a current visual update of the panel's connection status
regardless of what page is currently active.
• When a connection is established, the message displayed is either "Connected via
Ethernet " or "Connected via USB ".
• If no connection can be established by the Modero panel, it will continue to try and
establish a connection while displaying: "Attempting via ...".
• The word "Encrypted" appears only when an encrypted connection is established with a
target Master.
• The panel must be rebooted before incorporating any panel communication changes and
detecting any active Ethernet connections. The Ethernet connection is not detected
until after a reboot.
Connection Status
Red Connection Status icon -
indicates no connection to a Master
Green Connection Status icon -
indicates communication to a Master
Video button doesn't
appear on Non-Video (CA) panels
Battery Base button doesn't appear
until NXT is connected to a BASE/B
VG Series Modero Touch Panels