Panel Connection Logs Page Elements; Checking The Panel Connection Logs; Refreshing The Panel Connections Log; Clearing The Panel Connections Log - AMX NXD-1200VG Operation/Reference Manual

Panel Connection Logs
The options on the Panel Connection Logs page (FIG. 126) allow you to view and track the connection history of the
panel.
FIG. 126 Panel Connection Logs page
Features on this page include:

Panel Connection Logs Page Elements

Back:
Connection Status icon: The icon in the upper-right corner of each Setup page shows online/offline state of the panel to
Connection Logs
Clear
Refresh
Page

Checking the Panel Connection Logs

1.
Press the Tools button in the Protected Setup Navigation Buttons section. This opens the Tools menu.
2.
Within the Tools menu, press the Panel Logs button. All connection data is contained in the section Connection
Logs.

Refreshing the Panel Connections Log

1.
Press the Tools button in the Protected Setup Navigation Buttons section. This opens the Tools menu.
2.
Within the Tools menu, press the Panel Logs button.
3.
Push the Refresh button.

Clearing the Panel Connections Log

1.
Press the Tools button in the Protected Setup Navigation Buttons section. This opens the Tools menu.
2.
Within the Tools menu, press the Panel Logs button.
3.
Push the Clear button.
4.
Confirm your selection.
VG Series Modero Touch Panels
Saves all changes and returns to the previous page.
the master.
• Bright red - disconnected
• Bright green - connected. Blinks when a blink message is received to dark green every 5
seconds for half a second then go back to bright green.
• Bright yellow - panel missed a blink message from the master. It will remain yellow for 3
missed blink messages and then turn red. It will return to green when a blink message is
received.
Note: a Lock appears on the icon if the panel is connected to a secured NetLinx Master.
A history of all connections, attempts, and failures for the panel.
Clears the Connection Logs history.
Refreshes the Connection Logs history.
Indicates the current page of the Connection Logs.
Use the Up and Down arrows to move from one page to the next.
Firmware Pages and Descriptions
145