Protected Setup Page; Video Slide-Out Menu; Video Settings Page - AMX NXD-1200VG Operation/Reference Manual

Firmware Pages and Descriptions

Protected Setup Page

This button opens the Protected Setup page which centers around the properties used by the panel to properly
communicate with the NetLinx Master. Refer to both the Protected Setup Navigation Buttons section on page 132 and
the Protected Setup Page section on page 133 for more detailed information.

Video Slide-Out Menu

Pressing the on-screen Video button causes an option menu to slide outwards from the Navigation buttons (FIG. 107).
This option menu provides you with three choices: Video Adjustment, RGB Adjustment, and Streaming Adjustment.
Each of these options corresponds to an on-board slot position where the related components reside (as seen below). As
an example: pass-thru can only be enabled via slot 2 because the information is routed through the NXA-RGB card
residing in Slot 2 on the board. If the panel does not have the related components, the option menu button will be greyed
out. Refer to the following sections for detailed information on each option.
FIG. 107 Video Adjustment Slide-Out Options Bar

Video Settings Page

The Video Adjustment page (FIG. 108) (accessed by pressing the Video Adjustment button on the Setup page and then
selecting the appropriate button from the option bar) sets the Video properties of the incoming video signal from an
NXA-AVB/RGB Breakout Box.
FIG. 108 Video Adjustment page (showing default values)
The elements of the Video Settings page are described in the table below:
Video Settings Page Elements
Back:
Connection Status icon: This visual display of the connection status allows the user to have a current visual update of
Settings:
Video Settings:
Status:
122
Slot 1 Slot 2
Saves the changes and returns you to the previously active touch panel page.
the panel's connection status regardless of what page is currently active.
• A Lock only appears on the icon if the panel has established a connection with a currently
secured target Master (requiring a username and password).
• The Default Settings button sets the video settings to their default values (indicated in
this table).
• The Undo Changes button disregards any changes made on the page since the last
settings were saved.
• The Save Settings button saves any changes made to this page.
• The Black & White button toggles the Black & White display mode. Default = Off.
• The Sharpness button toggles the Interpolate (Sharpness) feature. Default = On.
• The Interlace button toggles the Interlacing feature. Default = On.
Displays whether or not a video-sync signal is detected.
Slot 3
Incoming Video signal
Once done making your screen
adjustments, SAVE SETTINGS.
VG Series Modero Touch Panels