Flight
To ensure the aircraft successful return to home after Failsafe activation, aim to only ly in Ready to Fly mode.
The Phantom will automatically descend during the Failsafe process if there are less than 6 GPS satellites
detected for more than 20 seconds.
When the aircraft is landing automatically, users can control the aircraft's position and altitude if the remote
controller signal is recovered.
Aircraft cannot navigate around vertical obstacles on its return home course during Failsafe. However, you can set
return home altitude value in Phantom Assistant to avoid hitting vertical obstacles through DJI Phantom Assistant.
Quickly lipping the S2 switch of the Remote Controller from top to bottom 5 times or more will reset the current
aircraft position as a new home point. Rear LED light indicators will blink green rapidly when successful.
Failsafe on the DJI VISION App
The DJI VISION App will provide information during Failsafe.
4.3 Regaining Control During Failsafe Procedures
Position of Switch S1
How to regain control
5 Low Battery Level Warning Function
If the DJI smart battery is depleted to a point that may affect the safe return of the aircraft, the low battery level warning
notiies users to take action. Users are advised to land the aircraft immediately when they observe these warnings. The
thresholds for these warnings are automatically determined based on the current aircraft altitude and its distance from
the Home point. Details of the battery level warning are listed below:
Critical Low
battery level
warning(Red)
28
©
2015 DJI. All Rights Reserved.
RC Signal Lost
Figure 53
Position-1
When the S1 switch is switched to Position-1, toggle
the S1 switch to any other position once to regain
control. If the Remote Controller signal is recovered,
control is returned to the pilot.
Low battery
level warning(Yellow)
Battery level indicator
Figure 54
Suficient battery
level(Green)
Current
battery level
Ready to Fly
Figure 55
RC Signal Lost
Position-2
Position-3
Regain control as soon as signal is
recovered.
Estimated
remaining
light time
Need help?
Do you have a question about the PHANTOM 2 VISION+ and is the answer not in the manual?