Firmware Upgrades - Sierra Wireless AirCard Hub Quick Start Manual

Advanced Settings (Power User)
When Power User mode is selected, you can also configure the
basic settings of the wireless network and the WAN port function,
as well as in-depth configuration options for the AirCard Hub.
You can access the advanced settings pages by clicking "Login
or by clicking on "Switch to Advanced View
User radio button). The default login credentials are:
username: admin username:
username: username:
If you change your default settings and forget your credentials,
you can reset the unit to factory default by pressing the RESET
switch at the back of the AirCard Hub for approximately 12
seconds (until the LEDs start flashing).

Firmware Upgrades

Users are recommended to check firmware updates regularly.
1. Go to the following website to download the firmware image
http://www.sierrawireless.com/Support/Downloads.aspx
2. Change the operating mode to the Power User, and login to the
advanced settings as described above.
3. From the menu select System
4. Click the Browse button and navigate to the location of the
firmware image you downloaded and select that image.
5. Click "Apply" to start the upgrade process.
During the firmware upgrade process all the lights on the front of
the AirCard Hub will flash and the process will take several
minutes. Do not interrupt the power supply during the upgrade Do not interrupt the power supply during the upgrade Do not interrupt the power supply during the upgrade Do not interrupt the power supply during the upgrade
process. . . . Once completed, your AirCard Hub will reboot to the process
process process
Easy mode operation.
Switch to Advanced View" (next to the Power
Switch to Advanced View Switch to Advanced View
password: admin password:
password: password:
System -> Update Firmware
System System
Update Firmware
Update Firmware Update Firmware
Login"
Login Login
11
1