Table of Contents
Advertisement
Clear Spot 4G+ User Guide
50
If it works in the other device, the card slot on your Clear Spot 4G+ personal
hotspot may have a problem.
If the card doesn't work in the other computer, try one of the following:
· Use a different microSD card.
· Reformat your card.
Note: The formatting procedure erases all the data on the microSD card, after which the
files CANNOT be retrieved. To prevent the loss of important data, please check the
contents before you format the microSD card.
Software Update Available
The update may improve performance and add or modify features.
Note: During installation of the update, your Internet and Wi-Fi connections won't be
available.
When the installation is complete, you will need to reconnect to Wi-Fi.
To install the update:
1. Ensure your device is connected to the power adapter or computer, through
the USB cable.
Note: If you'll be using USB for data transfer (and not just for charging the device), you
must install the device driver. See
Admin Login
2. In the
section (in the upper left area of the home page), enter the
administrator password (1–20 characters/numbers). (The default password is
"admin".)
OK
3. Click
.
4. Click the alerts icon to display the alert window.
5. If more than one alert is available, use the
alert window) to browse to the "3G Activation Required" alert.
6. In the Software Update Available alert window, click
7. Read the information in the Software Installation Options window.
8. To install the updates, click
— or —
If you are not in a strong signal area, make a note of the URL displayed in the
I'll get the update later
window and click
download the update to your computer, and then
File" on page
65.
9. When the installation is complete, reconnect to Wi-Fi. See
to Wi-Fi?" on page
"Making a Tethered Connection" on page 43
Download and install now
. At a later time, access the URL to
110.
and
buttons (at the top of the
Update Options
.
.
"Upgrade Firmware From a
"How Do I Connect
.
2131352
Advertisement
Table of Contents
