Digisol DG-BG4300NU User Manual page 99

Next Hop
Metric
Interface
Add Route
Update
Delete Selected
Show Routes
Static Route
Table
Click Show Routes, the page shown in the following figure appears. The table shows a list of
destination routes commonly accessed by your network.
Enter the IP address of the next hop in the IP route to the
destination device.
The metric cost for the destination.
The interface for the specified route.
Click it to add the new static route to the Static Route Table.
Select a row in the Static Route Table and modify the parameters.
Then click it to save the settings temporarily.
Select a row in the Static Route Table and click it to delete the row.
Click it, the IP Route Table appears. You can view a list of
destination routes commonly accessed by your network.
A list of the previously configured static IP routes.
DG-BG4300NU User Manual
99