Digisol DG-BG4300NU User Manual page 30

After the settings are done, click Next, the page as shown in the following figure appears.
The following table describes the parameters in this page:
Field
PPP Username
PPP Password
PPP Connection Type
Enter the username for PPPoE dial-up, which is provided by
your ISP.
Enter the password for PPPoE dial-up, which is provided by
your ISP.
You can select Continuous, Connect on Demand, or
Manual.
•
Continuous: After dial-up is successful, PPPoE
connection is always on-line, no matter whether the
data is being transmitted or not. It is recommended
to select it.
•
Connect on Demand: After dial-up is successful,
within the preset idle time, no data is being
transmitted; the router automatically disconnects
the PPPoE connection.
In this case, you need to enter the idle time.
•
Manual: Select it, you need to dial up and
disconnect the connection mannually.
30
DG-BG4300NU User Manual
Description