Digisol DG-BG4300NU User Manual page 59

After adding a PPPoE ATM VC to the table, click
in the following figure appears. In this page, you can configure parameters of this PPPoE
PVC.
The following table describes the parameters and buttons of this page:
Field
Protocol
ATM VCC
Login Name
Password
Authentication Method
Connection Type
Idle Time (s)
It displays the protocol type used for this WAN connection.
The ATM virtual circuit connection assigned for this PPP
interface (VPI/VCI).
The user name provided by your ISP.
The password provided by your ISP.
You can choose AUTO, CHAP or PAP.
You can choose Continuous, Connect on Demand, or Manual.
If you choose Connect on Demand, you need to enter the idle
59
DG-BG4300NU User Manual
in the PPPoE mode, the page shown
Description