Digisol DG-BG4300NU User Manual page 51

The following table describes the parameters of this page:
Field
DHCP Mode
IP Pool Range
Show Client
Subnet Mask
Default Gateway
Max Lease Time
Domain Name
DNS Servers
Set VendorClass
IP Range
If set to DHCP Server, the router can assign IP addresses, IP default
gateway and DNS Servers to the host in Windows95, Windows NT
and other operation systems that support the DHCP client.
It specifies the first and the last IP address in the IP address pool. The
router assigns IP address that is in the IP pool range to the host.
Click it, the Active DHCP Client Table appears. It shows IP addresses
assigned to clients.
Enter the subnet mask here.
Enter the default gateway of the IP address pool.
The lease time determines the period that the host retains the
assigned IP addresses before the IP addresses change.
Enter the domain name if you know. If you leave this blank, the
domain name obtained by DHCP from the ISP is used. You must enter
host name (system name) on each individual PC. The domain name
can be assigned from the router through the DHCP server.
You can configure the DNS server ip addresses for DNS Relay.
Click it, the Device IP Range Table appears. You can configure the IP
address range based on the device type.
DG-BG4300NU User Manual
Description
51