Digisol DG-BG4300NU User Manual page 58

Local IP Address
Netmask
Unnumbered
Add
Modify
Delete
Reset
Current ATM VC Table
remote IP address and subnet mask.
•
If select DHCP, the router is a DHCP client, the WAN IP
address is assigned by the remote DHCP server.
Enter the IP address of WAN interface provided by your ISP.
Enter the subnet mask of the local IP address.
Select this checkbox to enable IP unnumbered function.
After configuring the parameters of this page, click it to add a
new PVC into the Current ATM VC Table.
Select PVC in the Current ATM VC Table, then modify the
parameters of this PVC. After finishing, click it to apply the
settings of this PVC.
Select PVC in the Current ATM VC Table, then delete the PVC.
Click reset to undo the settings entered in this page and retain
them to default settings.
This table shows the existing PVCs. It shows the interface
name, channel mode, VPI/VCI, encapsulation mode, local IP
address, remote IP address and other information. The
maximum item of this table is eight.
58
DG-BG4300NU User Manual