Digisol DG-BG4300NU User Manual page 61

4.4.2.2 3G
This page is used to configure the parameters for your 3G network access.
Field
Enable/Disable
Pincode
APN
Dial Number
Username
Password
Connection type
Idle Time (min)
NAPT
Default Route
MTU
Selection will Enable or Disable 3G WAN.
Enter the Pincode – Check with 3G Service provider.
Enter the APN - Check with 3G Service provider.
Enter the dial number eg: *99#, #777 etc as per ISP.
Enter username – Check with 3G service provider.
Enter password – Check with 3G service provider.
Persistent means Automatic dial & Manual means manual dial.
Router will disconnect after idle for "x" minute.
WAN IP/Port sharing (Network Address Port Translation)
Enable or Disable Default route. Router will select the default route to
internet.
Set as per 3G Service provider (Do not modify).
DG-BG4300NU User Manual
Description
61