Digisol DG-BG4300NU User Manual page 66

The following table describes the parameters of this page:
Field
Band
Mode
SSID
Channel Width
Control Sideband
Channel Number
Radio Power (Percent)
Show Active Clients
Apply Changes
Choose the working mode of the router. You can choose from
drop-down list.
Choose the network mode of the router, which is varied according to
the software. By default, the network model of the router is AP.
The service set identification (SSID) is a unique name to identify the
router in the wireless LAN. Wireless stations associating to the
router must have the same SSID. Enter a descriptive name that is
used when the wireless client is connecting to the router.
Options available are 40 MHZ, 20 MHz and 40/20 MHz
There are two sidebands upper and lower bands. The lower band
comprises of channel numbers 1-7. The upper band comprises of
channel numbers 5-11.
A channel is the radio frequency used by 802.11b/g/n wireless
devices. There are 11 channels (from 1 to 11) available depending
on the geographical area. When You may have a choice of channels
(for your region) you should use a different channel from an
adjacent AP to reduce the interference and degrading performance
occurs when radio signal from different APs overlap.
Choose a channel from the drop-down list box.
You can choose the transmission power of the radio signal. The
default one is 100%. It is recommended to choose the default value
100%.
Click it to view the information of the wireless clients that are
connected to the router.
Click it to apply the settings.
66
DG-BG4300NU User Manual
Description